Tunnel Excavator
TE 210
|
For heading in soft ground.
- Optimal cross section: approx. 25-60 m²
- Diesel drive: 165 kW
- Operating weight: 28 t
|
|
Diesel engine
|
Water-cooled turbocharged engine Deutz
|
|
|
Power rating at 2'000 r.p.m:
|
165 kW
|
|
Diesel engine complies with emission standard:
|
COM 3
|
|
Fuel tank capacity:
|
|
An alternative to the standard Diesel drive is the 132 kW electric drive for increased machine versatility and operation in environments where compressed-air heading method is applied.
|
Operating data
|
Maximal vertical reach:
Maximal digging depth:
Minimal operating height:
Minimal overhead clearance:
Machine width lower carriage
Machine width upper carriage:
Machine height over cab:
Machine height for transport:
Rear swing radius:
Minimal swing radius:
Operating weight:
|
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
t
|
8'500
3'900
4'700
3'300
2'500
2'700
3'100
3'300
2'250
3'650
approx. 28
|
|
|
Crawler-type undercarriage
|
Undercarriage with dozer blade:
|
2'700 mm
|
|
Hydraustatic travel drive via 3-stage planetary gear
|
|
|
Travel speed:
|
1-1,7/ 4,5 km/h
|
|
Crawler chain type:
|
D6
|
|
Length:
|
3'450 mm²
|
| Width of triple grouser shoes (in option 500 mm): |
400 mm
|
| Crawler chain drawbar pull: |
280 kN
|
| Gradability: |
max. 100 %
|
Certification for tunnel construction
The machine meets the current CE-requirements and is certified for tunnel construction according to EN 12111, Dec. 2002.
|
Boom Equipment
Monobloc tunnel boom equipment for excavtion of soft ground or blasted material, composed of:
A basic jib with double lift rams.
A tunnel swivel console 2x45°
A dipper stick with double lift rams and integrated bucket ram.
Length of the standard dipper stick 3'780 mm
Dipper stick crowd distance (in 4,7 m height) 2'400 mm
Width of standard ripper bucket with 2 teeth Esc V51 660 mm
|
Bucket radius:
|
1'175 mm
|
|
Ripping force:
|
100 kN
|
|
Breakout force:
|
140 kN
|
|
|
Hydraulic system
|
Output controlled dual axial piston pump with ''laod-sense'' control and electronic power limit control.
|
|
|
Pump capacity:
|
|
|
Hammer / TCU control circuit:
|
280 l/m
|
|
Max. hydraulic operating pressure:
|
350 bar
|
|
Hydraulic oil capacity (incl. system):
|
450 l
|
| Hydraulic oil tank capacity: |
370 l
|
| Hydraulic oil filter: Full-flow return filter with contamination indicator. |
|
| Filter finesess: |
10 µm
|
|
Optional Equipments
There is the possibility for the attachment of a range of ancillary equipment such as emission control with soot filter, quick hitch for tools, cylinder protection on dozer blade, hydr. TCU (max. 100 kW), hydr. rock breaker (max. 1200 kg), différente bucket sizes, ripper tooth, Electric drive (110/132 kW) instead of Diesel drive, dipper sticks for longer or shorter reach, etc.
Further details of attachments and accessories available upon request.
Subject to modification without prior notice.
|
|
Standard drawing