Hammer Tunnel
ITC 320 V45
|
Excavation boom equipment with rock breaker / bucket combination for tunnelling in soft and medium hard ground conditions by using bucket and hydr. hammer.
- Minimal cross section: approx. 18 m²
- Diesel drive: 165 kW
- Electric drive: 132 kW
- Operating weight: approx. 43 t
|
|
Drive units
|
Electro-hydraulic and Diesel-hydraulicpower packs each with a separate pump units.
|
|
|
Electric drive for emission-free work at the face.
|
|
|
Air-cooled E-motor, Power at 400 Volt , 50 Hz:
|
132 kW
|
|
Diesel drive for travelling and operation without electrical supply.
|
|
|
|
|
|
Power rating:
|
165 kW
|
|
Diesel engine complies with emission standard:
|
COM 3
|
|
Operating data (V45 boom equipment)
|
Mininimal cross section:
Minimal operation height:
Machine width:
Maximal height:
Transport height:
Length (dep. on equipment):
Width of loading apron (adjust.):
Width of conveyor (internal):
Height of conveyor (internal):
Conveyor capacity:
Conveyor discharge height:
Operating weight:
|
m²
mm
mm
mm
mm
mm
mm
mm
mm
m³/h
mm
t
|
approx. 18
4'800
2'700
3'650
3'150
~16'000
2'500-4'000
785
875
approx. 250
2'500-3'500
approx. 43
|
|
|
Electrical system
|
Total installed power:
|
140 kW
|
|
Voltage (standard):
|
400V - 50 Hz AC
|
|
Control voltage:
|
230 - 24 V DC
|
|
Electrical system acc. to:
|
EN 60529 (IP54)
|
|
Cable reel hydraulically driven with 75 m
|
3x150+3x35 mm²
|
Operator’s cab
The operator stand with hydraulic vertical adjustment (500 mm) permit optimal all-round visibility. Alternatively open FOPS canopy with frontguard or optionally closed cab.
|
Boom Equipment V45
Excavation boom equipment with rock breaker / bucket combination for tunnelling in soft and medium hard ground conditions by using bucket and hydr. hammer, composed of:
King post with jib and tilt-swivel console.
Tool holder with a combination of hydraulic hammer and excavation / loading bucket.
Automatic lubrication system and flushing device for the hammer.
Water spraying device.
|
|
Hydraulic system
Load Sense hydraulic system with twin axial piston pumps.
Hydr. pilot control for travelling and main working functions.
Boom control with 2 joysticks in Euro standards.
Thermostatic controlled hydr. driven oil/air cooler.
|
Max. hydraulic operating pressure:
|
250-350 bar
|
|
Pump oil flow
|
540 l/min
|
|
Hydraulic oil capacity (incl. tank):
|
600 I
|
|
Hydraulic oil tank:
|
450 l
|
|
Other Equipment
It is possible to attach a range of ancillary equipment, such as rubber plated conveyor, transverse cutting unit, soot particle filter, central greasing device, video survey, pony truck, etc.
Further details of attachments and accessories available upon request.
Subject to modification without prior notice.
|
|
Standard drawing